Submitted by usom t3_10itcva in jerseycity
Comments
LyndonBKinden t1_j5h753s wrote
Yeah the extended balcony/floor also lead me to believe it's intentional
silenti t1_j5i41mp wrote
Yeah there's like 5 floors there that are sorta "bubbled" outward.
[deleted] t1_j5j2elt wrote
[deleted]
driftingwood2018 t1_j5h7qyw wrote
Intentional. That section of building extends further out from top and bottom of the building.
jerseycityfrankie t1_j5gkw2s wrote
Who among us HASN’T built a skyscraper that collapsed?
HappyArtichoke7729 t1_j5joh18 wrote
Me!
drkensaccount t1_j5gtuo6 wrote
My guess is that it's a different twist on the cantilevered floors Toll Brothers used on the other 2 buildings they built. Both of those have a few floors that jut out over the ones below it (a less extreme version of what Mac-Cali did with URBY. If you want better info, there's a rendering of what they're planning at the corner of Provost and Steuben.
pixel_of_moral_decay t1_j5gf685 wrote
Not a structural engineer.
Looks intentional to my eye.
They're aligning the downward forces directly to the below support column. Rather than built structure to transfer the load to something else (think the header of a door or window transfer weight above to the jack stud).
I believe inspections are done per floor during construction in JC, something that irks developers as it really slow the process. So an inspectors been on site each time.
jae34 t1_j5itva0 wrote
It's called walking columns or in more layman terms sloping columns, totally normal in concrete construction. We do it all the time in architecture either to clear an area or this case to pick up extra load or be within spacing constraints.
CaptainScottFox t1_j5jc2l0 wrote
Like my fellow structural engineers have said, looks like an architectural and structural choice that is well coordinated. Or I should say a well coordinated engineered solution to an architectural choice.
a_trane13 t1_j5gnhz6 wrote
I think it’s more ideal that each column is landing on the one below, rather than using (and stressing) the horizontal structure to transfer the load.
Why they’re at a slight angle, I’m not sure. It looks like there are four floors there that are slightly wider… could be an architectural choice or something to do with building balconies.
squee_bastard t1_j5hy1ed wrote
My biggest totally irrational fear is one of these buildings around me collapsing during construction.
mwssnof t1_j5haekc wrote
Some buildings not only have angled columns like these, but the columns "walk" from floor to floor, so there's always some overlap of the columns from floor to floor, some vertical transmission of the gravity load, but not completely, so the net result is a crazy stacking of pennies reaching amazing, seemingly impossible overhangs.
The way I find it helpful to think about these kinds of columns is to imagine wider columns only where there are wider balconies and longer cantilevers to support. You can then visualize the bigger columns on top of smaller ones, then topped again by smaller ones, like a narrow cylinder supporting a wide one supporting a narrow one. This way, you can imagine how the full volume of the bigger columns is actually not needed. Instead, the load shifts out towards the extended balcony/cantilever. Then, just remove the concrete you don't actually need, and use a constant diameter cylinder to form the column, and you get these angled columns.
Fox_Body_Barra t1_j5jzpz2 wrote
Probably intentional, but it was built non union so you never know.
seriousgenius t1_j5gnl8b wrote
What building is this
ChuckleheadStrategy t1_j5hkqdk wrote
It's 151 Bay by Toll Brothers. There is a section of floors in the rendering that appear to jut out which aligns with these floors that have the slanted columns.
SoundMachineJC t1_j5jic11 wrote
yeah this is from https://www.skyscrapercenter.com
Nice that the OP questioned that better safe then sorry.
seriousgenius t1_j5i1wtv wrote
Wow. They made solid progress.
dpw59 t1_j5rcw4o wrote
Yup, similar to the Morgan and 10 provost, this building has a section of floors that stick out more than the rest.
They are all part of the 4 stage project by toll brothers. There’s a 4th building supposed to go at corner of Marin & Bay when they finish this.
whoisisthis t1_j5hqwrz wrote
As opposed to good!?
gimme_alt_girls t1_j5hvlkt wrote
Looks like those floors have a larger footprint than the rest, columns are appropriately sloped I’d say
gordan_life t1_j5kfvjg wrote
No matter what are they doing, won't change the future picture that major residents would live under the shadow when they move in.
psynautic t1_j5kq2v5 wrote
I think it's a design choice and it'll look like it kinda bubbles outward in tthe middle there
Catarmy1 t1_j61ys6p wrote
Its progress stop picking
TemporaryData t1_j5hb9y7 wrote
Luxury pillars
PICHICONCACA t1_j5hojn7 wrote
These buildings are gonna collapse in 15 years.
BikingVikingNYC t1_j5gmyk3 wrote
structural engineer here:
Sloping columns put some extra loads on the floors, so as long as these loads are taken into account when designing, there is no issue.
This incline is big enough that it should have been noticed during construction. The fact that they built over a dozen floors above it means it's intentional.